AMP Research BedXtender HD Max
We engineered the BedXtender HD Max to solve the frustration of hauling oversized cargo in a short bed truck. This heavy-duty bed extender flips down to give you up to 2 feet of additional enclosed cargo space—that's 60% more room than your standard bed alone.
Built from aircraft-grade aluminum with a silver anodized finish, our BedXtender HD Max is designed for serious use. The powder-coated steel frame locks securely into your truck's stake pocket holes, creating a stable extension that handles up to 450 pounds of cargo. When you're not hauling longer items, it flips forward inside the bed to hold loose cargo against the cab, or removes completely in seconds with no tools required.
Whether you're a contractor carrying lumber, a weekend warrior hauling kayaks, or simply need the versatility to adapt your truck bed to any job, the amp research bedxtender hd max transforms your pickup into a more capable cargo vehicle without sacrificing the convenience of your tailgate.
Construction & capacity details
Aircraft-Grade Aluminum Construction
We chose aircraft-grade aluminum for the BedXtender HD Max because it delivers the strength you need without adding unnecessary weight to your truck. The silver anodized finish resists corrosion from road salt, mud, and weather exposure—critical for equipment that lives outside year-round.
The powder-coated steel mounting frame anchors into your truck’s factory stake pockets, distributing the 450-pound load capacity across multiple connection points. This design eliminates the stress concentrations that cause cheaper bed extenders to fail under real working loads. The aluminum tube construction flexes slightly to absorb impact from shifting cargo, then returns to shape without permanent deformation.
Three-Position Versatility
The amp research bedxtender hd max adapts to three distinct hauling scenarios. In the extended position, it flips down behind your tailgate to create that crucial extra 2 feet of length—perfect for lumber, ladders, kayaks, or any cargo that’s too long for your bed alone. Your tailgate closes and latches normally, giving you a secure enclosed space.
Inside the Bed
Flip the BedXtender forward and it becomes a cargo divider, holding loose items like mulch bags, sports equipment, or groceries against the cab wall. This prevents your cargo from sliding around during hard braking or cornering. The same stake-pocket mounting system that secures the extended position locks it firmly in the forward position.
Installation & Compatibility
Installation requires zero drilling and takes about 5 minutes. The BedXtender HD Max fits any truck with 4-inch center-to-center stake pocket spacing—that covers nearly every full-size pickup manufactured in the last 20 years, including Ford F-150, Chevy Silverado, Ram 1500, Toyota Tundra, and Nissan Titan models.
Slide the mounting pins into your truck’s existing stake pockets, then secure with the included thumb screws. The design allows for slight width adjustment to accommodate variations in stake pocket spacing. When flipped to the inside-bed position, our BedXtender sits low enough to work with most soft roll-up and folding tonneau covers.
More AMP Research Truck Bed Solutions
Rated 4.8 by verified buyers
BedXtender HD Max Questions & Answers
The BedXtender HD Max fits any full-size pickup with 4-inch center-to-center stake pocket spacing. This includes Ford F-150, F-250, and F-350; Chevy Silverado 1500, 2500, and 3500; GMC Sierra 1500, 2500, and 3500; Ram 1500, 2500, and 3500; Toyota Tundra; and Nissan Titan models from approximately 2000 to present.
The key requirement is exposed stake pocket holes. If you have a spray-in bedliner that covers the stake pockets, you'll need to cut access holes at those locations before installation.
The BedXtender HD Max extends your usable bed length by up to 2 feet (24 inches) when deployed in the extended position behind your tailgate. For a typical short bed truck with a 5.5-foot bed, this brings your total enclosed cargo length to approximately 7.5 feet.
This 2-foot extension represents roughly 60% more cargo capacity compared to your bed alone, giving you enough room to haul common 8-foot and 10-foot materials with the tailgate closed and latched.
Yes, the BedXtender HD Max is specifically designed to work with your tailgate closed and latched. The extender sits just below tailgate height, creating an enclosed cargo area when the tailgate is up.
This design gives you secure storage for long items without worrying about cargo sliding out during transport. Your tailgate functions normally—you can still access the handle, lower it for loading, and use your backup camera without obstruction.
We rate the BedXtender HD Max at 450 pounds maximum load capacity when properly installed in all four stake pockets. This rating assumes even weight distribution across the length of the extender.
For best results with heavy cargo, position the bulk of the weight forward in your truck bed and use the BedXtender to support only the overhanging portion. Always secure cargo with appropriate tie-downs—the BedXtender contains items but doesn't replace proper load restraint.
No drilling is required. The BedXtender HD Max uses your truck's factory stake pocket holes for installation. You simply slide the mounting pins into the stake pockets and secure them with the included thumb screws.
Installation takes about 5 minutes and requires no tools. The unit removes just as easily when you need full bed access, leaving no permanent modifications or hardware behind. If you have a spray-in bedliner covering the stake pockets, you will need to cut access holes, but no drilling into the truck bed itself is necessary.
The BedXtender HD Max is compatible with most soft roll-up and folding tonneau covers when positioned in the forward (cargo divider) mode inside your bed. In this position, the extender sits low enough that most covers can still roll or fold fully open.
When you flip the BedXtender to the extended position behind the tailgate, you'll need to roll up or remove your tonneau cover to accommodate the extender's height. Hard tri-fold and retractable covers may have different clearance requirements, so check your cover's specifications if you plan to use both accessories together.
We build the BedXtender HD Max from aircraft-grade aluminum with a silver anodized finish. This material choice provides excellent strength-to-weight ratio while resisting corrosion from road salt, rain, snow, and UV exposure. The powder-coated steel mounting frame adds structural rigidity at the connection points.
The anodized aluminum finish is highly durable and won't rust, flake, or fade like painted steel alternatives. Customers in northern climates report the finish holding up perfectly after years of winter use with heavy salt exposure. The entire unit is designed to live outside permanently without degradation.